11-25-2023 01:40 PM
Hello,
I need some help troubleshooting my access points that are no longer working. Wifi has become slow and in some places throughout the house non existent.
Product Name: 12-PRT POE+ COMP 2X1G SFP+
Product Family: ICX Switches
Product Code Part: C12P
11-29-2023 09:10 AM
Here is the information
11-29-2023 09:17 AM
Hi @ah07
Greetings!!!
Thank you for the response and the update.
Everything looks fine. At this point, we may need to factory reset the APs. Please follow the below process to factory reset your APs to configure them with a new Wi-Fi Network/SSID.
IMPORTANT NOTE: To perform a factory reset correctly on one of the access points, you must disconnect the rest of your other access points from the "ICX-7150-switch". For example, if you have 3 access points, you should go to the switch and disconnect 2 of the cables to turn off the "2 access points" and only leave 1 connected with which we are going to work the factory reset once you configure the access point and make sure all is good, go ahead and reconnect the other Access Points back.
As you have 2 R510 Access Points in your setup, remove the cables of any ONE Access Point, and perform the factory reset only on the ONE connected access point. Once you complete it, connect the unplugged Access point cables back to the Switch ports and it will sync up with the configurations from the factory reset Access Point.
Physical Factory Reset of RUCKUS Access Point:
Ruckus Unleashed Set-up using Web:
https://www.youtube.com/watch?v=j8I5aVwMNMg
Password recovery setup:
https://www.youtube.com/watch?v=sqnG8fupaLk
Please let me know if you have any queries in this regard.
Thank you again for your patience and understanding.
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community.
11-29-2023 09:21 AM
Do I need to do all three of these steps? Or just one of them?
11-29-2023 09:25 AM
Hi @ah07
Thank you for the response.
You need to follow all the steps. First one is the guide for factory reset process and remaining 2 are VIDEOS showing the process. 3rd video is a suggestion for the password recovery in case if you lose the password in the future.
Please follow the factory reset post carefully and let me know if you have any queries in this regard.
Thank you again for your patience and understanding.
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community.
11-29-2023 09:28 AM
Both CTL lights on my APs are solid green. I only have two so I unplugged one of them. Will it be ok to move forward even though I don't know which one is the "master"?