Hi @ laharr2
We need that you remove from the ceiling the two Access Points that are not responding, and connected with a good know Ethernet cable directly to the ICX 7150 Switch, then perform a factory reset to both, now the one that is green must work as expected because it's online, the air light is normal to be off because that will work just for MESH environment, and that is not the case for Lennar houses.
Note: do not response privately
1:Remove from the ceiling, the two not working access points
2:re-connect it back to the ICX 7150 Switch with a good know Ethernet cable.
3:Perform a factory reset to both.
Physical Factory Reset an Access Points Ruckus
How to factory reset or factory default different types of Ruckus Access points?
4:If there is no response, please share the results.
Technical Support Engineer | L2 TAC Wired