The RUCKUS ICX® Campus Switch family delivers a complete, scalable, and high-performance routing and switching solution that supports today’s demanding network applications.
I have set the baud rate correctly.I can use the same console cable to access cisco and HP switches.But i cannot console into ICX switches.Has anyone encounter this before?
My icx7150 switch has quit working. I have unplugged it and tried the reset. Nothing is working. When I unplug it and hold the rest button in and plug it back and the amber lights flash and go off I release the reset button. It goes dead again. Noth...
I've been trying to add an interface to a LAG that I recently created and when I go to add the interface to the LAG I get"Error - Port x/x/x has Flexauth enabled on itLAG ports adding validation failed"I found the documentation on how to configure Fl...
Switch will not update firmware and when in cli it says it is in read only. Also when I try to configure ssl there is no start up config file. tried multiple times and says the same thing. when i show flash it shows "Compressed Pri Code size = 259764...
Hi All, Need assistance in configuring data and voice vlan on a port. vlan 101 - voicevlan 102 - data How can I configure Multi-VLAN Access Port? I'd like the phone to be on the voip vlan but assign data vlan when a pc is connected to the phone dat...