Hello, I have a Ruckus ICX7150 switch that I'm having issues with. I'm trying to get 802.1x RADIUS authentication enabled on some ports,. When trying to remove the port from all vlans I get this message:SSH@TPAJDSW01-01-IDF1C(config-if-e1000-2/1...
Hello,
We manage a Zone Director 3050 and approximately 75 APs at a hotel, currently both the APs and the ZD are on vlan100. We need to change this to vlan101. Is there an easy way to change this? Currently, the APs are pulling DHCP on vlan100...
My replies keep getting deleted anytime I try and show the switch outputVersion: SPR08090g.binShow flash indicates that the switch was upgraded from SPR08061c, which appears to be on the secondary flash, the primary, which is what it booted off of is...
You are correct, there is nothing show in the configs for mac-vlan-permit. The version is: SPR08090g.Stack unit 1:NAND Type: Micron NAND 2GiB (x 1)Compressed Pri Code size = 32566572, Version:08.0.90gT213 (SPR08090g.bin)Compressed Sec Code size = 2...
