ICX Switches
The RUCKUS ICX® Campus Switch family delivers a complete, scalable, and high-performance routing and switching solution that supports today’s demanding network applications.
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Resolved! Securing remote access to ICX7450 running 9.0.10c

I'd like to better secure remote access to the ICX7450.  There doesn't seem to be away to apply an ACL to the SSH configuration, so I tried both the "all-client" and "ip ssh client" commands, but they don't seem to work in 9.0?  Yet they are in the o...

frnkblk by New Contributor III
  • 304 Views
  • 3 replies
  • 0 kudos

Resolved! 7150-24s won't talk - what's the missing link?

This is baking my noodle so I'm going to lay out a bunch of context in hopes someone can help me identify the (probably-trivial) problem before I lose the remainder of my hairline. BLUF: Amateur-hour homelabber can't get new 7150-24P to establish lin...

Show VLAN IP Address / Subnet / Gateway

Hi All, I have a really simple question. I need to check the IP address / Subnet / Gateway of a vlan interface. ICX-7150 24PCan’t seem to find command to show this. I’ve tried so many combinations which return invalid input.Its doing my head in and i...

Cas21 by New Contributor
  • 371 Views
  • 1 replies
  • 0 kudos

Resolved! Connecting Two Switches

Hey Everyone, Im very much a networking noob and was wondering if someone can point me in the right direction. I have an ICX 7150-C12 and an ICX6430-C12. The 7150 is running the L3 firmware and the 6430 is running the base firmware; layer 2 only. Im ...

npineiro by New Contributor
  • 337 Views
  • 2 replies
  • 0 kudos

Switch recovery with 09.0.10c

I have a 7150 48p that will not boot.I am in recovery mode the recover instructions say to use the boot code from the firmware download but with 09.0.10c there is no boot code in the download.Any ideas?