The RUCKUS ICX® Campus Switch family delivers a complete, scalable, and high-performance routing and switching solution that supports today’s demanding network applications.
I have purchased an ICX-7450-48P from amazon, both pri and sec flash is showing SPS080300h.binHow do I get it to reload SPR codes, where can I find the codes? Thanks
I have a small stack of ICX-7150 switches running software version 10.0.0.10.I am trying to setup the monitor and mirror pair of 1/2/2 to 3/1/21 - both ports are ethernet, 1 gig copper. I have succeeded in get it set up and working but I don’t seem t...
Hello,We have some ICX 8200 Switches. I have built a couple of ACLs and VE interfaces on the switch. When I go to apply them to the interface, I do not get an "ip access-group" option. I do see this option on physical ports. I am not sure what I am m...
Hello,I tried to follow the steps in this article https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-a-Software-recovery-on-an-ICX7150-switch/td-p/47483. I'm connected to the switch, but no Port shows up. I've down...
A discussion in my office recently left me with some questions. I'm seeking guidance now. I've exclusively used manifest approach when code upgrading switches. I was told it do POE, code version, and boot (if needed for that model/code).I'm hearing a...