I struggled earlier this week to upgrade an ICX7450 from 9.0 to 9.0.1c and one of the things that I tried, but did not work, was to use an scp client to copy the file *to* the switch. For example,
scp SPR09010cufi.bin firstname.lastname@example.org:flash:sec:SPR9010cufi.bin
It's described here, too: https://docs.commscope.com/bundle/fastiron-08095-upgradeguide/page/GUID-C276A95F-9988-49A2-8159-9F18...
The file copies over ... but that it did was to create file in /home/username.
In lieu of the method described above, is there a spot to drop the file into the ICX where it will then be recognized as the primary or secondary?
Go to Solution.
Engineering confirmed SCP is now only allowed from FastIron CLI. External push has been blocked.
View solution in original post
I did get some initial response that starting with 9.x, we only allow SCP initiated from FastIron CLI. I am working to 100% confirm that and will let you know.
Thanks for getting that clarified!