R700 ethernet port question

I wanted to see if this setup was possible:-Use port 1 for POE power and a single VLAN (guest wifi)     -If guest wifi is tagged to VLAN 100 (the only additional VLAN) do I use a trunk or general port?-Use port 2 as an access port/bridge to wan for t...

There's any way to limit the number of clients per SSID on each AP?

There's any way to limit user of each AP per SSID ?For example  If i'm deploying several SSID in the same AP i would like to limit the number max of clients in each AP, that should be an interesting feature for example:i have : 3 SSID likepublic wifi...

Is there a CLI reference guide for ZF7372 AP?

I can't find anything in the technical documents section. There are several CLI guides for ZoneDirector and FlexMaster. But I'm looking for a guide for an 7372AP in a standalone mode. I also tried to search "CLI", but there was no results. Could you ...

AP's showing old Geolocation

Hi, I have recently used some 7372's in Barcelona (fw 9.9.0.212). AP's received a full reset before being deployed. Deployed with a ZD1200. All appeared to be fine except some of the time devices would show location being in London. These AP's were u...

what outdoor AP models that can established mesh more than 500m?