I have just one layer 2 switch where i have 3 untagged vlans( default vlan, Office and students). I have clients connecting directly to the office vlan via ethernet cable and some on wifi via a standard wireless router. For students i have the zone d...
I am curious why Ruckus see fit to only offer 2 years of sustaining software engineering after End-of-Sale (EoS) when competitors such as Aerohive and Aruba offer 5 years?Looking at the documentation that Ruckus provide:Ruckus Support is unable to pr...
Currently It have some CLI script apply to the T300 / T301 series AP after script is applied the PoE switch reboot and those AP is not able to boot up.*Remark: Before apply the CLI script, it has also reboot the PoE switch without problemSo I suspect...
So, since we installed the Ruckus setup I've been looking and thinking about ways I can monitor the AP's, mostly I'm concerned about overloading the AP's since we have some pretty dense sites.I already have Icinga setup and running so spent some time...
Our network has 2 AP zones with a total of 280 AP's (240 7782's and 40 7982's) . We are running SCG (3.1.1.0.641). The 50 AP's that are not showing their GPS locations are spread out between the AP zones, different sites and AP versions. Here is what...
