I try to upgrade to 9.7.2.0.32 from 9.7.1.0.17, the ZD1100 controller can upgrade to 9.7.2.0.32, but the Zone Flex 7982 was failure to upgrade to 9.7.2.0.32.Then, I prepare to following the upgrade path.When I find out the 9.7 release versionI cannot...
There appears to be a bug with timezones in the AP's connected to a SmartZone controller. If you have the timezone of a zone set to anything except GMT, there will be log entries every 90 seconds that say the following:wsgclient/timezone value too...
Hi,I have 6 access point ZoneFlex R310 and I have to put these devices in a building we there isn't the possibility to use a cable. So the idea is to use radio bridge for the five devices and use the last device for router connection with cable.So I ...
Hi all,Any one can explain to me this question?I have a cisco switch connect to ZD1200 and some APs. AP will broadcast SSID with vlan ID that belong management vlan on AP (VLAN 65). So what is port status that i need apply on both cisco switch and AP...
I have some older 7982s currently connected to a vSZ running 3.5.1 that will soon be replaced. I want to donate the 7982s with an older ZD1100 (running 9..9.1) to someone, but I don't know what I need to do to the 7982 to get it to be recognized/usab...
