Hey guys, looking for some direction on an exciting project (well for me..) on which AP or AP's would suffice for broadcasting to 100 units split into 6 blocks. See image of the layout attached. I was thinking of starting with 1 AP on top of roof blo...
Hey guys, looking for some direction on which AP would suffice for broadcasting to 100 units split into 6 blocks. See image of the layout attached. I was thinking of starting with 1 AP on top of roof block 1 which is the highest points. I am not sure...
I have a Ruckus 7372. Can't seem to get it to turn on using any AC adapters I have. The label on the back says 12V-1A... Well, 12V-1A doesn't work, 12V-1.6A doesn't work... does it need something beefier? I have a 12V-20A bench supply that it does wo...
Hi,In the platform Ruckus VSZ-H there is the possibility to load several firmware to support old AP(Example: ZF7343). In the literature says that each zone can have a firmware. Any information or link where you can find help. Best Regards
Hi there, I have a r300. I wanted to use the AP as an standalone. But I used the wrong firmware model. Now the AP is rebooting and all the leds are on. I have tried to reset the ap. But it didn't work. Also I can't connect with the web inte...
