RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

Smart Roam and Mac OS compatibility - known issues?

I have successfully enabled Smart Roam on an R750 Unleashed network by logging into master > enable > config > wlan "SSID_name" > smart-roam 6 > end > end > quitThe deployment consists of 10 R750 APs and -55dbm or better 5GHz HE80 coverage everywhere...

ruckus r650 and VHT160

Hello,I'm think about replacing r730 by r650.However, I realised that it does not look such much better as I expected.On my r730: 2x2-80MHz - 1200 MbpsTherefore I can expectant that 4x4-160MHz should give 4800 Mbps (double stream and double channelis...

Multiple VLANs on R550

I am not able to get my R550 to pick up the right IP settings... On my switch I am doing DHCP Services. Lets say VLAN 100 with IP Addresses of 10.100.0.0-10.100.0.254.Ideally, I want the R550 to get an IP Address in the VLAN 100 range and then give t...

Gateway Mode AP and "HA" for branch office

Hello, I would like to confirm what is the Slave unit behavior on Gateway Mode unleashed AP design.Can I have a design like this and when the Msster AP is dead, will the slave unit pick up all config even those port forwarding?Image: https://ibb.co/z...

R510 and R610 Compatibility

Hello,I have a home network with around 85 smart devices connected. I have an ICX7150-C12 switch and two R510 access points that are plugged into the switch. Its all been working well for 5 years or so. I want to add an R610 access point to the sy...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

2

1

1

1

1