RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

R710 PoE and Second Port Power?

I have and R710 and and is in at PoE+ mode however I am unsure if this will allow the second port to power another PoE device? When I enable the second port the checkmark doesn't stay checked unless the other device connected to the second port is po...

Zoneflex 7372 - This site can't be reached

Once I set up my Zoneflex I then cannot access it via the network. I try to browse to 192.168.0.1 and I'm told the site can't be reached. I've tried different browsers. I can access the wireless network that the Zoneflex has created but can't get int...

Initial R710 setup Cant Connect https http or ssh

I'm configuring an R710, going through the initial setup. I factory reset the device and I can ping the default IP 192.168.0.1, however I cannot access it via the web or through SSH. There's a strong possibility that this device was once configured w...

Connecting T300 root AP to P300 point-to-point bridge backhaul

Does the connection between a T300 root AP and a P300 point-to-point backhaul require the use of a switch in an unleashed network? This seems to be the case from the specs I have seen on each unit. Our existing ZF7762 APs (yes I know they're old) l...

R500 doing DNS queries to support.ruckuswireless.com every 7 seconds?

I had a look at the DNS queries flowing through my network and noticed the ruckus device is querying DNS for support.ruckuswireless.com every 7 seconds! It gets back a CNAME of two CDN servers. Is this a configurable setting? Whis is it doing this so...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

3

1

1

1

1