RUCKUS Indoor and Outdoor Access Points (APs)

Ruckus Wireless

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

After vSZ 5.0.0.0.675 upgrade, bunch of ap's stays offline

When trying to upgrade the ap's from v3.6 to v5 in vSZ, approx 50 of 150 ap's stays offline. There is no way I can reach them.SSH to the specific ap's isn't possible and the LWAPP2SCG policy is accepting all. The rest of the ap's upgraded succesfully...

What does "target fail detect" mean?

We are seeing intermittent reboots of APs with this message showing in ZD as the restart reason. What is the cause of this?

Bandwidth drop on 802.1x

HI i am facing bandwidth drop issue in my network with 802.1x enable SSID only. Device in my Network: 1- Zone Director 2- Access Point R5003- Cisco Switch 29604- Cisco ACS for RadiusProblem: i have observed that when wireless client disconnect from t...

Tx Power settings in ZD

Hello guys,I have several Ruckus ZoneFlex R510 APs. I want to know mW equivalent, if I will set TX power settings to -8dB in ZD for both bands. Thanks in advance

Possible to use PoE injector instead of AC adapter for T710 in mesh mode?

Need to power multiple T710 to use in mesh mode. Don’t have 4-pin AC adapter, but do have correct PoE injector. Can I use injector without data input to power T710 and use in mesh mode?

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

2

2

1

1

1