HiI have a ZF7762-s AP, which I upgrade it with firmware 9.8.3.0.14 for stand alone purpose,but the option wireless where I can configure new SSID didn,t appear.
We have a NAC solution on my network and I recently deployed a few
R720's. I noticed that all ports where the 720's are connected show two
MAC addresses. I compare the MAC address entries for all other AP's and
they all show one MAC. Port Gi1/0/44...
I have green lights on the pwr and ctl only. I've configred the port to trunk. I've even set the switchport trunk native vlan 80switchporttrunk allowed vlan 80,81I've removed the switchport trunk native vlan 80 since it should pass traffic from all ...
