RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

Multiple VLANs on R550

I am not able to get my R550 to pick up the right IP settings... On my switch I am doing DHCP Services. Lets say VLAN 100 with IP Addresses of 10.100.0.0-10.100.0.254.Ideally, I want the R550 to get an IP Address in the VLAN 100 range and then give t...

Gateway Mode AP and "HA" for branch office

Hello, I would like to confirm what is the Slave unit behavior on Gateway Mode unleashed AP design.Can I have a design like this and when the Msster AP is dead, will the slave unit pick up all config even those port forwarding?Image: https://ibb.co/z...

R510 and R610 Compatibility

Hello,I have a home network with around 85 smart devices connected. I have an ICX7150-C12 switch and two R510 access points that are plugged into the switch. Its all been working well for 5 years or so. I want to add an R610 access point to the sy...

data traffic flow of wifi clients suddenly drops out/freezes

Hello,For a few weeks now, we have been experiencing problems in some of our Wifi environments with R320 or older R310, controlled within SmartZone, where the connections suddenly "freeze" or something similar. One moment the client device is perfect...

Resolved! unable to enable eth port 0 on r770

Hi Guys maybe someone can help please,I am having issues with a new r770 out of the box. First of all the web interface is not enabled and I am having to enable it via command line with "set http enable" user guide just say connect to web interface n...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1

1

1

1

1