R710 LACP and 200.8.10

With an R710, it does not appear to be possible to configure LACP in order to create a port channel for the two ethernet ports.The way one might expect:ruckus(config-ap)# status-lacp enableModel r710 doesn't support to configure lacp-state.Alternativ...

12 nos of R610 are connected to same POE switch at one location broadcasting recover me

12 nos of R610 are connected to same POE switch  at one location broadcasting recover mehow to act when AP showing recover me message. what could be the problem

QoS/DSCP on unleashed

HI,Does Unleashed support QoS/DSCP?If not, would i need to upgrade to CloudWifi?Thanks

R510 ZoneFlex Untagged VLAN and Cisco Switch

I have an R510 AP that I am trying to use in stand alone mode. I have 3 networks I want to bring down to the AP using the ZoneFlex firmwareVLAN 10 - MGMT =  This is the network I want to assign the IP to the AP to manage it.VLAN 20 - Wireless = Main ...

I have a new R30 AP couldn't be managed by SZ104 which software version 3.6.2.0.222