Enabling 11ax mode shows "parameter error when setting mode to 11ax" in ZoneFlex Solo Access Point 108.2.0.0.837 (GA) Software Release (R730) 108.2.0.0.837, R730 AP.
I have a Ruckus R610 with 200.7.10.2.339. Suddenly, my VOIP provider (ONSIP) has become flakey after the above firmware upgrade. Some phones are activating and some are not.Onsip has said that it appears to be a problem with our AP. Any idea why thi...
i have a t310c, when configure rate limit at 5 mbps and runs a speedtest in a laptop or device, test shows 5.04, 5.17, 5.30 mbps, in other cases, shows 4.95, 4, 85, etc, so, my question is, why rate limit exceeds the limit configured? i make another...
It seems that Virtual Smart Zone currently does not support RadSec. And connection to my radius servers goes through internet, I want to understand is it possible to configure Virtual Smart Zone to establish ipsec connection with radius server and do...
Good morning.We use ZoneDirector to manage our R600 APs on campus. We have a bunch of R600s that were spare since 2017 but now we want to use them. All the live APs are firmware: 10.1.1.0.42 and the Spare APs are firmware: 9.12.0.0.336. When we plug ...
26th March 2023 8am PST (UTC -7) : Currently we are experiencing technical difficulties with portal and phone communications. For urgent or important issues please use the "Chat now" feature on the right side of the https://support.ruckuswireless.com Support Portal, or you may search here for technical solutions.
We apologize for any inconvenience.
