I have ruckus unleashed deployment in country house. i have fiber internet and cable to my garage. on street wall there is Ruckus T310d. and in main house (15 meters) + 1meter brick wall - 2 ruckus r710 for clients. Internet channel currently 100mbit, but i'd like to increase to 300. Currently averange number of devices for unleashed -20. including smartphones, tablets, notebooks, tv, fire tv 4k etc.... 10 people in self-isolation. My question is - if i replace T310d to R710 will my connection speed on wireless mesh bridge increase? currently i have ~130-150mbit between devices and radio quality 21. if i replace T310d with R710 would it benefit connection speed? or anyway mesh utilize only 1 channel? Coverage on street is fine with t310d.. i need speed.
thank you for a reply! or couse, i will use outdoor T710 version. My question is - will my backdoor mesh network utilize 1 stream, and 3 streams for clients, or, for example it can utilize 2 or 3 stream and 2 or 1 for client?
My response was based on the details given by you and you have mentioned "R710".
Yes, if T710 is meshing with R710 or a 4x4:4 AP (both should be getting full power to enable all 4 chains and high throughput) then mesh link will get higher throughput and client behind it will also get high throughput.
Use of RX/TX chains depends upon multiple factors like client supportability, compatibility, multipath, etc.