RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

Negotiating 802.3at UniFi Switch 48 POE-500W vs Ruckus R750

Just installed some new Ruckus R750 AP. They need 802.3at for full functionality. It seems like the negotiation between they two is ending up with 802.3af. Anyone have any advice on this?

Ruckus R550 vs R310 Antenna Patern

Hello, I replaced Unleashed R320 with R550 and I see some of my devices which have been at Moderate or Excellent Connection before now are showing as Poor. My R320 was mounted on the ceiling and I placed on the same place the R550. But now when I loo...

Bonjour gateway on AP: enable on all AP's, or just on a few?

We're using Bonjour Gateway on AP (not on the ZoneDirector). That works fine: Apple TV's are published to the clients VLAN and they can reach them.Question: is it necessary/recommended to enable the Bonjour Gateway configuration on all AP's, or just ...

R710 in Configure.Me-XXXXXX mode

I have an R710 in Configure.Me-XXXXXX mode. It was connected to a SmartZone 100 controller and has since been removed from the controller.I can connect to it with the Configure.Me SSID and the S/N of the unit. The IP of the unit is 10.154.231.125 a...

Constant Power Cycle after upgrade to 200.9.10.4.202

Ruckus R610 unleashed upgraded to latest firmware (200.9.10.4.202) yesterday, keeps power cycling constantly with no pattern.I get the same message every time. No other reasons.These are the messages on logs:2020/10/01 16:38:51HighAP[RAP@XXXXX] warm...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

2

1

1

1