Hi,With my previous gear (Mikrotik CAP ACs flashed with OpenWRT), I was able to get 500-550 Mbps on an ideal case on the 5 GHz band (80 MHz) on my Macbook, and 300 Mbps on my phone running iperf3 connected to a wired server on the same switch as the ...
Upgraded vSZ to 6.1.1.0.959 and 3*R750 + 3 *R850 to firmware 6.1.1.0.1274One specific IoT device based on an ESP32 drops offline from a 2.4Ghz network after 5 minutes due to 'inactivity' even though its constantly transmitting temperature and pressur...
system:SZ-100 AP:R310how can i disable ap 5ghz.i have already disable the 5ghz in the group.but the APs in the group can not autodisable the 5ghz.in the room my moblephone connect wifi well through 5ghz,can not connect the internet,but connect wif...
I ran into an issue setting up Sonos Arc Sub and Surrounds. Sonos tech support mentioned that Ruckus access points convert multicast/broadcast traffic to unicast traffic, which disrupts expected Sonos behavior. Sonos requires multicast and broadcast ...
Hi Ruckus Mems,I recently have Ruckus R700, R710 and R805.1/ I try to use Speedflex App on my iPhone iOS (12 Pro Max) to test speed to AP.With R700 Standalone (latest firmware):- Downlink: 424.9 Mbps, U: 594.8 MbpsWith R710 Unleashed (latest firmwar...
