CommScope RUCKUS Community Forums

Have an ICX7550 stack and trying to configure the ICX7600-2X40GQ module as 4 10g connections on Module 3 for uplinks to our core switch.  Can not find any documentation on that module or how to configure it.  Can it even be configured as 4 10g ports?...

Trying to add vlans to switch ports in SZ and can't figure out how to add multiple port ranges.  Documentation doesn't give any examples and Google searches have turned up nothing.  I know you could use the CLI, but trying to do this all through the ...

Trying to figure out these Ruckus switches and things are not going well. Trying to stack two icx7650 switches by configuring them through Smartzone, which from what I have read you should be able to do.  I have followed the guides with no luck.  I c...

New to Ruckus switches. Have an ICX 7650 with one uplink to an Extreme switch.  ICX is managed by a SZ100.  When I plug in a Ruckus R650 to a port on the ICX switch, 1 gig or 2.5 gig port, the uplink port goes down.  Show Interface says port 1/2/1 is...