CommScope RUCKUS Community Forums

peter_kley · 08-05-2020

I have a R710 connected to a Meraki switch & MX. Base SSID is on VLAN1, secondary SSID are on VLAN 2 & 10. Switch port is set to Trunk, native 1. I can connect to the primary SSID and get DHCP, but not either of the secondary SSID. Packet capture on ...

peter_kley · 04-09-2018

I can't seem to figure out how to disable 2.4ghz on a SSID. All other posts seem to talk about the ZD and they don't seem to be the same. vSZ is running 3.5.1. If we create the WLAN group and then create the AP group, there doesn't seem to be a way t...

peter_kley · 01-21-2016

Can't find any instructions anywhere, would like to be able to have something to hand to techs so they at least have a clue what to press...I kinda made it work but it was totally random so have no idea exactly what steps are necessary.

peter_kley · 08-05-2020

Apparently I'm blind and completely overlooked the Ethernet Ports in the list...Port 1 was set to Access, switched to Trunk, problem solved.

peter_kley · 04-10-2018

The key was that we can't edit the default AP zone which threw me off. Once we created the AP group we were able to move all the APs to that group and override the WLAN groups. Thanks for the snip, it helped.

peter_kley · 04-10-2018

We tried this, but didn't see a way to 'disable' 2.4 or 5 in an AP group. If we unchecked the frequencies, it said we had to select one. What specific setting do we uncheck/check to disable a radio? Screenshot?

peter_kley · 02-22-2018

How are you handling the batch import? Whatever software I try to edit the CSV file with it changes it and removes the "" around each field. Excel seems like the easiest to edit but I can't figure out how to make it work.Very frustrating that you can...

peter_kley · 01-19-2016

This looks great but I have no idea how to successfully use it...I've logged into my controller, scanned an AP, it appears in the Inventory and in my Controller as provisioned but the AP never connects to the controller. Without any documentation I h...

CommScope RUCKUS Community Forums

User Statistics

User Activity

R710 Stand-alone not passing secondary SSIDs VLAN info?

vSZ HS and disabling 2.4ghz on an SSID

Any documentation for the Swipe app?

Re: R710 Stand-alone not passing secondary SSIDs VLAN info?

Re: vSZ HS and disabling 2.4ghz on an SSID

Re: vSZ HS and disabling 2.4ghz on an SSID

Re: Batch Provisioning for APs with Virtual SmartZone

Re: Announcement: SWIPE 2.0 Android now available in Google Store