vSZ HS and disabling 2.4ghz on an SSID
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-09-2018 10:28 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-02-2020 02:03 PM
I want to have the SAME SSID broadcast on some AP Groups in BOTH 2.4 and 5Ghz and ONLY on 5Ghz on other AP Groups.
There should be the same WLAN Service toggle that there is for the individual Edit AP page.
Am I missing something simple here that would let me use the AP groups and be able to toggle what Radios are enabled?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-03-2020 06:28 AM
AP group/Zone cannot disable 2.4 or 5 G radio. You have to use and map WLAN groups with AP group and change the AP group settings accordingly.
Refer below forum link where this is already answered. Though below thead talks about ZD settings but settings on vSZ are similar.
https://forums.ruckuswireless.com/ruckuswireless/topics/adding-2-4ghz-to-existing-5ghz-network-for-r...
Regards,
Syamantak Omer
Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RCWA | RASZA | RICXI
RUCKUS Networks, CommScope!
Follow me on LinkedIn
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-08-2020 09:13 AM
I still do not see a way to disable 2.4GHz at any level other than turning it off for each specific AP. It is not an option at the AP Group level or the WLAN group level. With Zone Director I was able to create an AP group that had the setting to not use the 2.4 GHz radio. When I wanted to have an AP use 5 GHz only (perhaps due to interference with other equipment), I would just move that AP into the group and it's 2.4 GHz radio would turn off. I don't see how to do that with SmartZone.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-10-2020 07:39 AM
Hi there,
You can associate or disassociate a WLAN from 2.4 or 5G radio by playing with AP group and WLAN group settings.
I hope you have referred the previous comment and the link provided on it.
Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RCWA | RASZA | RICXI
RUCKUS Networks, CommScope!
Follow me on LinkedIn
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-17-2021 09:51 AM
hello,
I do not see how this works i created wlan group and ap group. i want 2.4g turned off. i get the following error when i try to turn off 2.4 on the group.