The release notes for these two versions state "Resolved two security issues related to UI vulnerabilities. For security incidents and responses, see www.ruckuswireless.com/security", but the security site doesn't seem to list anything newer than ID ...
It appears that the SNMP MIBs for 3.6 on the SZ300 point to those for 3.5.1- any chance of getting this corrected? Support wouldn't look into it without a serial.https://support.ruckuswireless.com/software/1517-smartzone-3-6-ga-snmp-mibs-for-sz300-s...
@matt_hodge_d5fx06hrqxty4
I have not had to wall mount one, but Anthony has the right idea- they come with standard drywall anchors, so they should be fairly simple if that works. The quick setup guide for them has the template for the screw spaci...
The R500 is the newest midrange AP that would work for this, which is end of sale so it might be difficult to get ahold of.
Unleashed is stable, just has a feature set difference vs the ZD, so it's going to be dependent on what is currently configur...
Unfortunately the R510s start at 9.13, so you have a big gap there. Are the WLANs possibly able to be set up as Autonomous WLANs so they may work without the ZD? If so, you'd be able to upgrade the ZD to 9.13 to support the new APs and just leave t...
As 9.3.4.0.21 was a security fix at some point it was offered for free, but it may not be the case now. May be worth asking.
As for hops, the current -> 8.2.2.0.7 -> 9.1.2.0.8 -> 9.3.4.0.21 should work. The release notes for 9.1.2 show the below:...
I think it's "help snmp" to show the options in the CLI, but I don't have one handy to check so that may be incorrect. It should be under systemgroup so if that command doesn't work it would be "help systemgroup". Basically "help <command>" will sh...
