There are only two ways to factory reset an AP.1. via the AP CLI command set factory2. via the button on the AP itself.So sorry to inform you, you will need to get a scissor lift to reset the AP.regardsMartin M
Hi Bill HDid you manage to get the AP working again?If not as Ashwin mentioned we will need some additional information.When you factory default the AP your configured SSID will be gone, so you will need to reconfigure it again.Please let us know if ...
Alternative on using DC power, you can try the following.Switch off the router that is providing the DHCP IP addresses.Then use the above points from Ashwin to factory reset one AP and enter via the default IP address 192.168.0.1 if that works then c...
Hi AhmeeR,As James mentioned in the advanced options you can set the VLAN ID for the SSID, in that case you can have multiple SSID on one AP with different VLAN (or the same depending how you set it).And as you run multiple vlan you need to set the s...
