cancel
Showing results for 
Search instead for 
Did you mean: 

FastIron 09.0.10e Multicast documentation wrong

vesalius
Contributor

The default for Flooding of Unregistered IPv4 Multicast Frames changed from enabled to disabled between 8.0.95 and 9.0.*, and the documentation page title does not accurately reflect that change.

 

1 ACCEPTED SOLUTION

jijo_panangat
RUCKUS Team Member

Hello @vesalius 

Thank you for pointing that out. If I understand correctly, the change in the title is required for the 9010 guides as the 10.0 guide is reflecting the changes correctly. Pls, confirm.
We will get this verified and make the necessary changes to the multicast guide.

 

Thanks

Jijo panangat
Principal Tech Support Engineer
https://support.ruckuswireless.com/contact-us 

View solution in original post

1 REPLY 1

jijo_panangat
RUCKUS Team Member

Hello @vesalius 

Thank you for pointing that out. If I understand correctly, the change in the title is required for the 9010 guides as the 10.0 guide is reflecting the changes correctly. Pls, confirm.
We will get this verified and make the necessary changes to the multicast guide.

 

Thanks

Jijo panangat
Principal Tech Support Engineer
https://support.ruckuswireless.com/contact-us