we have r310 around our facility and it was working great until we had some changes in our network, we have changed the dhcp settings and i had to change the controller's(unlieashed ap) static ip.after changing the static ip to the new one. i noticed...
Hello guys,
I am trying to configure the master r310 for a school im working in,
Manuals are leading me to dead ends...
I have successfully connected to the AP after plugging it in to functional and tested network port,
But i get no ip addess in...
Problem solved, the product was delivered with a different firmware, it got ip address from dhcp which somehow i missed... Any way, loaded unleashed image and than every thing ran great, thank you for your time and help!
No, the configure.me-xxyyzz wlan was not open auth,
Also after factory reset, found here in the forum the answer for that though,
I had to enter s/n of the ap the gain access to the network,
Unleashed.ruckuswireless.com doesn't work,
Pc get's APIPA i...
I did try going to the link.The manual that comes with the AP actually says i should set a static ip on 192.168.0.22/24 and than go to 192.168.0.1 on the web browser, but that didn't work eitherTried the link method from both smartphone and laptop
An...
Hi Michael,
The LAN is working, as i said, i plugged it in a functional and tested port, when i connect a pc to this port i have internet access,
When i connect the ap to the port, and than i connect my smartphone or my laptop to the Configure.me wir...
