Unable to configure r310

[shai_fisher]

Hello guys,
I am trying to configure the master r310 for a school im working in,
Manuals are leading me to dead ends...
I have successfully connected to the AP after plugging it in to functional and tested network port,
But i get no ip addess in my smartphone, tried to do it through the unleashed app but it tells me i have to connect to the network,
I have tried reaching it with ip but I can't find any ip other than my manually configured pc in 192.168.0.55
I dont even see it in arp -a...
I must be doing something really wrong here...

I also took it back to home to try and see if it is the network i was working on and same resaults there...
Plus, i couldn't find any relevant guides online

[shai_fisher]

I did try going to the link.
The manual that comes with the AP actually says i should set a static ip on 192.168.0.22/24 and than go to 192.168.0.1 on the web browser, but that didn't work either

Tried the link method from both smartphone and laptop
And i have also disabled any other virtual adapters for any case, left only wifi adapter enabled

[michael_brado]

No, static IP not right.  Do you connect to the Open auth Configure.me-XXYYZZ WLAN ok?
Go right to the Unleashed admin URL with a browser when connected.  Do you get the greeting screen?

[shai_fisher]

No, the configure.me-xxyyzz wlan was not open auth,
Also after factory reset, found here in the forum the answer for that though,
I had to enter s/n of the ap the gain access to the network,
Unleashed.ruckuswireless.com doesn't work,
Pc get's APIPA ip address,
Unleashed admin url is different or is it the same one?

[shai_fisher]

Any advice?

[shai_fisher]

Problem solved, the product was delivered with a different firmware, it got ip address from dhcp which somehow i missed... Any way, loaded unleashed image and than every thing ran great, thank you for your time and help!