CommScope RUCKUS Community Forums

atma_tiwana · 05-31-2021

Hi, I've seen some Ruckus R600's available for sale but they have the US in the description. As I'm the UK will these work fine or are there some potential issues ? And finally if a R600 that was pulled from a previous installation was not re...

atma_tiwana · 02-26-2021

Hi, I was looking at options on unleashed on my R500 and saw Transmit power was set to auto. But according to the link below it should not be in Auto. Can someone confirm this is still the case? https://docs.ruckuswireless.com/unleashed/200.1.9....

atma_tiwana · 02-08-2021

Hi, I have an issue with one device that keeps randomly disconnecting and reconnecting. The device is a Nest hello doorbell. In the UK it only runs in 2.4ghz. I have 2 R500's running the latest unleashed firmware. I've disabled 2.4ghz on one of t...

atma_tiwana · 02-07-2021

Hi, I have my network up and running. I have the firmware 200.7.10.202.121 on my R500's. On both my Android and iOS phones even though I'm logged into my network and I've toggled on notifications on both the phone and in the panel in the web acces...

atma_tiwana · 02-05-2021

Hi, Is there a way of getting notified if a device I have connected wirelessly starts sending data over the internet. I have a camera that even though it's turned off via software came on by itself. I want to know if it's sending a video stream to...

atma_tiwana · 06-01-2021

Thanks for the info, I shall pass on The US Models.

atma_tiwana · 02-28-2021

@syamantak_omer Thanks. I have the latest firmware and I was wondering about transmit power and that was all I could find about it. When you say managed by a controller are you referring to a unleashed controller and /or a zone controller ZD or wha...

atma_tiwana · 02-27-2021

Hi, I’m just wondering that if they say don’t use Auto, why it’s auto by default ? Also I thought having “screaming” signals was considered bad practice ?

atma_tiwana · 02-26-2021

I have set it manually now, but I wanted to know if using it in auto "breaks" anything. Normally I guess people will go Max, but that isn't the answer. If the answer is "Auto is OK", how does it choose the power level, does it look at other AP's ...

atma_tiwana · 02-26-2021

You can get an app called net analyzer on Android and iOS and then use that to get a list of devices on your local network and see if you can see it. iOS version won't show Mac afdress

CommScope RUCKUS Community Forums

User Statistics

User Activity

Will Ruckus R600 US work in the UK?

Unleashed Transmit Power

Nest Hello Issue

Not getting notifications on mobile app

Detect activity on a device and get notified

Re: Will Ruckus R600 US work in the UK?

Re: Unleashed Transmit Power

Re: Unleashed Transmit Power

Re: Unleashed Transmit Power

Re: Can't find ZoneFlex r500 IP