Hey,has anyone gotten Dot1x to work via Radius with windows with ICX platform?I've got it up and working great on Wifi, but the switch platform just hangs at Authenticating. I can see handshake happening, but it's like the switch stops answering. Any...
I need to isolate ports in a vlan, ala "protected port" but I can't use protected port because it disables the multicast paging feature of the voip set.
I tried to setup private vlans, but you can't create a router-interface under a pri...
I've enabled ip load sharing globally as well as maximum-paths in ebgp itself.
Checking my route table, I see only one route to my destination.
If I disable the ports, the secondary route does insert itself in the table.
Is this expec...
I've got a VOIP phone, and option 43 converted over to hex.
I have verified that everything outside of the ICX is correct, because I can push the options to the phones from another vendor switch using the same hex string and a dhcp server local...
DHCP is vlan specific as it’s a broadcast, so when you define the option 3 (GW) that’s the only vlan that will hear and receive addresses.
ie, port 1 in vlan 10 and you configure vlan 10 dhcp pool, devices in any other vlan won’t receive any.