Hi JMoore,Thanks for the outputs.Easiest way to resolve this issue would be to downgrade the switch to 8095 (flat) image and then upgrade to your intended version like 8095m.
Hi caliparcerito,Is SSH enabled on the switch (check using "show ip ssh config") ? If not, please follow below link and enable it and then check for the GUI access:https://docs.commscope.com/bundle/fastiron-09010-securityguide/page/GUID-8AAB14D8-A662...
Hi Cajee,Below is the link for the software licensing guide:https://support.ruckuswireless.com/documents/4313-fastiron-10-0-00-ga-software-licensing-guide/download
