New Contributor III
since ‎04-09-2018

User Statistics

  • 28 Posts
  • 1 Solutions
  • 5 Kudos given
  • 9 Kudos received

User Activity

Hey,has anyone gotten Dot1x to work via Radius with windows with ICX platform?I've got it up and working great on Wifi, but the switch platform just hangs at Authenticating. I can see handshake happening, but it's like the switch stops answering. Any...
HI, I am on a bit older code but can the 7750 platform on newer code do BGP per vrf?  The current code I am on can only do BGP in the main table, and VRFs are limited to OSPF / VRRP. 
Hi,  I need to isolate ports in a vlan, ala "protected port" but I can't use protected port because it disables the multicast paging feature of the voip set.  I tried to setup private vlans, but you can't create a router-interface under a pri...
Hi all,  I've enabled ip load sharing globally as well as maximum-paths in ebgp itself.  Checking my route table, I see only one route to my destination.  If I disable the ports, the secondary route does insert itself in the table.  Is this expec...
Hi, I've got a VOIP phone, and option 43 converted over to hex. I have verified that everything outside of the ICX is correct, because I can push the options to the phones from another vendor switch using the same hex string and a dhcp server local...