ICX 8200 - IP SSH Source Interface

[corey_costello]

Hello, 

I am trying to configure "ip ssh source interface" on the new 8200 platform, but it looks like that configuration has been depreciated. 

[BenBeck]

Hey @corey_costello 

The command has changed and you will now want to use the 'management source-interface' command. Please see the reference below:

https://docs.commscope.com/bundle/fastiron-10010-commandref/page/GUID-086C381B-CB6C-466E-A5B7-0569AF...

Hope that helps!

[corey_costello]

**bleep**, it looks like the functionality changed as well. 

I used to use this to restrict inbound SSH to a specific VE. 

[BenBeck]

Have you looked at the 'management access' command?

There are quite a bit of changes from 8.x > 9.x > 10.x. I would definitely recommend looking at the new 10.x documentation. Generally speaking, you should be able to get to the same or similar functionality, but it may look different in 10.x.