CommScope RUCKUS Community Forums

daniel_m · 10-02-2024

Ever since updating from 200.15, the Access Points web UI displays inconsistent information for the radio band.From a selection of my screen below, I assume the chart on the left is incorrect as it shows zero 2.4G clients, but the table on the right ...

daniel_m · 12-09-2022

Every once in a while, my AP will reboot and it appears to be the result of insufficient PoE+ power. My switch complains with the following when this happens:PD Over Current indication.I traced this down to an old configuration change based on a war...

daniel_m · 12-05-2022

Running Unleased 200.13.6.1.319 and recently noticed that my R710 is only communicating at 100Mbps. The output from my HP 2530-24G-PoEP switch shows the following:# sh int brief Status and Counters - Port Status | Intrusion ...

daniel_m · 06-01-2021

Hello community! So is anyone here running 200.10.10.5.229 at home with great success? I'm considering upgrading for the latest security fixes and to be on the "latest and greatest," but I am a bit worried about bringing too much "ruckus" to my h...

daniel_m · 05-12-2021

Might someone please highlight, in their own words, the major changes from the release notes file at RUCKUS Unleashed 200.9 (GA Refresh3) Release Notes | Technical Documents | Ruckus Wireless Support? Ruckus appears to be putting more general conten...

daniel_m · 12-10-2022

It's a little non-obvious compared to other more common online forums, but try clicking on ASK the Pack at the top of the site.

daniel_m · 12-10-2022

Hey Nick. I recommend you create a new post/question and provide as much detail as you can.

daniel_m · 12-09-2022

If you configured the AP to force 802.3at, reconfigure it to properly use LLDP per https://community.ruckuswireless.com/t5/Community-and-Online-Support/How-to-put-ZF-R710-in-802-3at-PoE-Mode/m-p/11576. Once I did this my switch shows the R710 proper...

daniel_m · 12-09-2022

Sorry for the late reply, but thank you for the clue sticks guys! I traced this down to a bad cable (how does a simple cable that never moves go bad?!), replaced it and we are back to 1000FDx!Cheers!

daniel_m · 06-15-2021

I'm the OP and decided to upgrade; I shouldn't have. Like @veno77, my network breaks once a week with a heartbeat loss. In looking at this further, it appears it might be PoE related. Port 2 is the R710. In the past I had issues with the R710 a...

CommScope RUCKUS Community Forums

User Statistics

User Activity

200.16.7.0.402 and Web UI Radio Band Inconsistencies

Unexpected Reboots from R710

R710 Negotiating at 100Mbps full

Looking for 200.10.10.5.229 Feedback

RUCKUS Unleashed 200.9 (GA Refresh3) Release Notes Unavailable

Re: Unexpected Reboots from R710

Re: Unexpected Reboots from R710

Re: Unexpected Reboots from R710

Re: R710 Negotiating at 100Mbps full

Re: Looking for 200.10.10.5.229 Feedback