CommScope RUCKUS Community Forums

Ankush_Chandan · 02-03-2023

Following are the Ruckus Certified Temperature Grade 10G SFP+ Modules for Outdoor AP deployment.For the SR-Short Range Deployments (0-300 Meters): 10G-SFPP-USR 10GBASE-USR, SFP+ optic (LC), target range 100m over MMF10G-SFPP-USR-SA 10GBASE-USR, SFP+...

Ankush_Chandan · 02-16-2022

Hello Ruckus Forum, As a Ruckus Technical Support Engineer, I would like to share my experience here on one the recent issues: Issue Reported: vSZ-H upgrade failure from the release 6.0 to 6.1. Issue Details: In this case, one of our customers was tr...

Ankush_Chandan · 10-09-2024

Hi YKSD, This is currently not an option that is supported by the RUCKUS IOT platform, but I do value your feedback and it is certainly a great feature enhancement request. I would raise it in my next PLM meeting.Regards,Ankush

Ankush_Chandan · 10-25-2023

Hi Anthony,I am afraid we do not support Citrix as of today but we do support following following platforms/Hypervisors for the v/SZ installation: Regards,Ankush

Ankush_Chandan · 10-20-2023

Hi Viththahan,RUCKUS R650, R750 AP's support BLE 5.1 standard.Regards,Ankush

Ankush_Chandan · 10-04-2023

Hello,In general, you need to create a NAT rule on the firewall that points to the the Local IP of your RWG Mgmt for you to be able to access RWG from within the local network. Also try to run a traceroute and see where is the traffic getting dropped...

Ankush_Chandan · 07-12-2022

Hi Ricardo,Limiting client count is done per WLAN per radio and not per AP.In order to limit the client count, go to WLAN > advance settings > Allow up to x clients per AP radio to associate with this WLAN.Regards,-Ankush

CommScope RUCKUS Community Forums

User Statistics

User Activity

Where can I find the list of Temperature Grade 10G SFP modules Certified by Ruckus for Outdoor APs ?

v/SZ High Scale Upgrade failure

Re: IoT Controller DB & Rules Backup automation

Re: Install vSZ on Citrix Hypervisor

Re: Bluetooth in R650, R750

Re: Connecting using external IP.

Re: How to configure the number of clients in each AP?