Hello, I had stopped working on it as I was able to just have it operational. I am once again trying to update the firmware after a power outage and cannot seem to update to current ufi firmware.
Switch will not update firmware and when in cli it says it is in read only. Also when I try to configure ssl there is no start up config file. tried multiple times and says the same thing. when i show flash it shows "Compressed Pri Code size = 259764...
Switch will not update firmware and when in cli it says it is in read only. Also when I try to configure ssl there is no start up config file. tried multiple times and says the same thing. when i show flash it shows "Compressed Pri Code size = 259764...
Hello, I had stopped working on it as I was able to just have it operational. I am once again trying to update the firmware after a power outage and cannot seem to update to current ufi firmware.
I performed software recovery steps per the guide and executed the reload command. The above string is what i got after the reload. Why is it showing next to the versions SPR/SPS 08080d.bin?
Followed the instructions but still getting read-only system error."Starting kernel ...Mounting file system...booting with 4.4 kernelNAND Type: Micron NAND 2GiB (x 1)PLATFORM MNdd cmd: UBIConfig partition mountedResource partition is mounted!!UBIFS e...
