ICX MAC-Auth Access Point multiple-hosts

[vvuillemin]

Hi,

How to return Radius Attribute to configure interface for "multiple-hosts". Is there an existing Radius Attributes ?

Scenario : We have access points in bridge mode that are authenticated through MAC-Auth via a RADIUS Server.

MAC-Address from the Access point should authenticate first with MAC-Auth and other MAC should be passthrough.

Thanks,

[Chandini]

Hi Team 

Thank you for reaching us

We do have option at interface level to operate in multiple hots mode on the switch. Below is the configuration.

• Device(config)#interface eth 1/1/1
• Device(config-if-e1000-1/1/1)#authentication auth-mode multiple-hosts

Below are few links you can refer

• https://docs.commscope.com/bundle/fastiron-09010-securityguide/page/GUID-EA4E5652-0CEE-420E-A386-325...
• https://docs.commscope.com/bundle/fastiron-09010-securityguide/page/GUID-04A0B05C-C9EA-4AD5-A3B6-CF6...

I hope this helps

Thanks 

[vvuillemin]

Hi Chandini,

Thanks for your answer. We already configured that.
The goal here is to be able to move an access point from a switch port to another without doing static configuration on the port. That's why I would like to be able to configure the switch port interface by sending back from the radius server a radius attribute that enabling authentication auth-mode multiple-hosts.

Thanks,