Hi @Jeremy813 I do understand that you are unable to access switch through IP address as well you need change firmware to be in switch mode. Please do provide below details so it will be helpful to provide the exact solution.1. May I know how you are...
Hi @Nckharel I do understand that switch is not powering on from the post as well you tried different power cable and power outlet and still not working. Please log a ticket with the below link so that we will help you to process RMAhttps://support.r...
Hi @CHOIYOUNGJAE As I mentioned earlier you can check CRC errors on the port with following below commands :"Show interface ethernet x/x/x" and "Show statistics ethernet x/x/x"CRC errors occurs due to bad physical cable or transceivers so please try ...
Hi @CHOIYOUNGJAE Thanks for the providing the details. You can swap AP to different port then observe whether any CRC errors are coming.As well try to connect with different cable from the switch then observe the status.If still getting the CRC error...
Hi @CHOIYOUNGJAE Could you please share the output of "Show statistics ethernet 1/1/1"Also please do refer below article related to CRC error in switch port : https://cloudsupport.ruckuswireless.com/answers/000006902Regards,Kamlesh M
