ZoneDirector
With simplicity and ease of use in mind, the RUCKUS ZoneDirector is purpose-built to address the gap between standalone, feature-deficient access points (APs) that must be individually managed and the costly, complex high-end enterprise systems that are overkill for most small business environments.
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

how to setup two ruckus controller

how to setup two ruckus controller with different number of license in one switch? I have ZD1200 (10) not configure yet. and ZD1100 (50) DHCP all AP's are in POE. What I need is to use the new controller with they same broadcast ZD1100 WLAN

jee_cee by New Contributor II
  • 695 Views
  • 10 replies
  • 1 kudos

Application QoS Policy ZoneDirector 3000

Hi, I am trying to prioritise Voice traffic on my ZD 3000 and can see that I can set QoS rule in an application policy however I can't create the rule because i can't input anything in the application box in the screenshot below. I can't figure out w...

Same SSID with Multiple Vlan

I have ZoneDirector ZD1200, Build 10.0.1.0 build 35.I have building A and B with same SSID let say "test".Each building have different  Vlan total 4 Vlan each Vlan has it own DHCP range.Now how can i mange different different Vlan AP with ZD1200 with...

ZoneDirector 1200 and Random Drops Outs

Currently, have 10 Ruckus R600 and a Zone Director 1200...We are an all-MAC shop and users are experiencing random dropouts (where they have to reconnect and disconnect) and not transitioning smoothly from AP to AP.Our vendor came in and installed a ...

L2 ACL (MAC) doesn't apply to AP immediatly

Hello,We're using ZD1200 with R310 AP.Same VLAN, MPLS network.However, I've got some issues ; I've created an Access List based on client MAC Address applied to a specific WLAN which worked correctly at start.But now, when I add a new MAC Address, I ...