RUCKUS ZoneDirector (ZD)

Ruckus Wireless

|

ZoneDirector

With simplicity and ease of use in mind, the RUCKUS ZoneDirector is purpose-built to address the gap between standalone, feature-deficient access points (APs) that must be individually managed and the costly, complex high-end enterprise systems that are overkill for most small business environments.

Forum Posts

Sorted by:

ASK the Pack

Inconsistent order of radios in web ui of ZD

When monitoring an AP in the ZoneDirector (Firmware 9.5.2.0), the Radios are sometimes switched around. I have details about a 7372 that shows "Radio 802.11g/n" on the left, and "Radio 802.11a/n" on the right, and another 7372 that has the 5GHz on th...

New alarm event (AP online)

At this moment there are different alarm event options that you can choose in the ZD. One of the them is an alarm event that gets triggered when an AP goes down. This is great. What we are facing, has our AP network is increasing, is that it would...

Adavantages and disadvantages of using multiple SSIDs

In a old thread (that I only noticed recently) it was mentioned that each SSID uses 2.3% of bandwidth. Not seen that figure mentioned before. I use a lot of SSIDs (12) to segregate, assign and control different groups of school laptops. If this is ...

ZF Indoor AP mounting preference

I have a lot of experience on Cisco Wireless not as much on Ruckus. I was involved in the Cisco Forums with regards to best mounting practices for Cisco indoor AP's wall (vertical) or Ceiling (horizontal) mounting and eventually they started making ...

Encourage clients to roam better

The solution to the "client decides when to roam" problem: Tell the ZD that: For all 2.4Ghz wifi clients whose AP sees them with less than 30db SNR: kick them off of their current AP *if* they are seen by another AP with an SNR that is more than 1...

Related Self-Help

Find More Solutions