RUCKUS ZoneDirector (ZD)

|

ZoneDirector

With simplicity and ease of use in mind, the RUCKUS ZoneDirector is purpose-built to address the gap between standalone, feature-deficient access points (APs) that must be individually managed and the costly, complex high-end enterprise systems that are overkill for most small business environments.

Forum Posts

Sorted by:

ASK the Pack

Help on ZD1200 - don't know license status

I bought a home that had a ZD1200 with it, and I don't need it. I can't find any documentation about licenses. Wihtout contacting the prior owner, is there a way to figure out what licenses are attached to the device? Or are they maintained in ano...

Move smart redundant ZD1200's to a different vlan

At the moment a site has two ZD1200's set up with smart redundancy with 10 x R610 APs connected on vlan1I need to move all of this to a different vlan (10). Is it as simple as setting the management address to one in vlan1, then changing the two cont...

When Upgrading ZD3000 from fw 9.13.0.106 directly to 10.0.0.0.142 can't detect T300 ap's

I upgraded ZD3000 from FW 9.13.0.106 directly to 10.0.0.0.142, so that i could have R610 operational i know that a lower version of firmware would have done the trick, but we went all the way to 10.0.0.0.142,R610 detected perfectly and also ap's 7982...

Force MAC OSX users to use 5Ghz

Hi - we have a common SSID "Wifi Secure" for both 2.4 and 5Ghz bands. We have an issue where MAC OSX devices always seem to connect on 2.4 GHz, and there is no way of disabling 2.4 as an option (unlike on most PCs). Is there any solution to help M...

need OID für Memory Utilization of ZoneDirector 1200

Hello, I try to Monitor the ZD und AP's with Nagios.All I'm missing is the zonedirector's memory load/usage.With OID 1.3.6.6.1.4.1.25053.1.2.1.1.1.5.59 it does not work, the value is always "3".Has someone used up the correct OID for the memory load ...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1