RUCKUS Unleashed

|

Unleashed

RUCKUS Unleashed enables controller-less Wi-Fi architecture for small business environments with superior performance, lower costs and simplified management.

Forum Posts

Sorted by:

ASK the Pack

How can I renew or release DHCP on unleashed AP?

I have three VLANs 150,151,152 to manage three different Unleashed Network.I'm pretty sure the settings on the switch port are correct and all VLANs can provide DHCP IPs to the AP.However, when I switch one of the APs with VLAN 150 to VLAN 151, the A...

WPA2/WPA3-Mixed 192-bit & Transition Disable Indication

I have a WPA2/WPA3-Mixed network authenticating with EAP-TLS on a RADIUS server. Android 12 devices connect to this network using WPA2, whereas I would prefer they connect using WPA3. However, when I set up a WPA3-only network (not mixed), leaving al...

R710 IP address after network outage

Hi,Whenever my network goes down (and my Ruckus R710 AP stays up), the IP address that is assigned to the R710 will default back to 192.168.0.1 which conflicts with my router. This causes the outage to persist when the network comes back up until I p...

R720 reset to defaults after power loss

Hello,My R720 device resets back to defaults and I have to either reconfigure or restore from backup. This has happened twice so far, once when I reboot my POE switch and the other time when we lost power (I have no UPS to perform graceful shutdown)T...

R710s on 9.12.0.0.336 to Unleashed problems MD5 error

I have a batch of used R710s that I'm trying to repurpose and they are all on a really old 9.12.0.0.336 zoneflex firmware. I seem unable to update the firmware to any other standalone, ZF, or Unleashed firmware. I can get to the GUI and the CLI just ...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

2

1