Randomly I am having issues with APs that require a reboot to regain Internet. In order to access the GUI IP I have to roam to another AP. When I remain connected to the problem AP and run a LAN scan, it shows only connected devices to that IP and I ...
Hello,i am planning a SmartMesh Network with Ruckus Unleased.I have two wired APs and seven non-wired APs (big Parking Area without Cabling).The wired APs will be the Root-APs.My questions:- How many Hops are supported with SmartMesh within an Unleas...
My question is regarding the AP Certificate Refresh which is required prior to November 2016.I have a 100's of Zonedirector and Virtual Smart Zone installations out in the field and I just wanted to confirm what exactly is going to be affected?As I ...
I have a small network set up with three R500s Unleashed. I am trying to use a VoIP service as the client has poor cellular coverage. When I try to make a call I am getting an error message that I have a weak signal even though in the dashboard is ...
Hi , i have problem can't access SSID Guest i have config Cisco SG300 connect to R500 (Config unleashed) SG300 ----> in fa 21----->Trunk allow vlan all(untage vlan 1 , Tag vlan 10,20,30) -------> AP R500and i have config ip helper address for all vl...
