cancel
Showing results for 
Search instead for 
Did you mean: 

smart zone 100 redundancy connection

felipe_herrera_
New Contributor
Hi, please help me in the description of connection phisycal between two sz100 in mode clustering. As it should be the connection to the switches that are in
Redundancy vrrp.

thanks
12 REPLIES 12

Thanks for reply, but in Figure 4 only shows one SZ to a switch, although if I have two SZ and connect them to switch so what's the configuration for two ports in switch and in SZ to be redundant?

Thanks for reply, but in Figure 4 only shows one SZ to a switch, although if I have two SZ and connect them to switch so what's the configuration for two ports in switch and in SZ to be redundant?

goutham_k
New Contributor

Is there any minimum latency required for clustering