cancel
Showing results for 
Search instead for 
Did you mean: 

smart zone 100 redundancy connection

felipe_herrera_
New Contributor
Hi, please help me in the description of connection phisycal between two sz100 in mode clustering. As it should be the connection to the switches that are in
Redundancy vrrp.

thanks
12 REPLIES 12

rahimi_mohammad
New Contributor
Hello. Sorry for mistake in the text.
I'm planning to have redundant for SZ100. Would you please help me?

Thanks alot

Vineet_nejwala
Moderator
Moderator
Hello Rahimi,

The process is very simple, kindly download the "Getting Started Guide" through below link and search with " Configure the Cluster Settings". 
https://support.ruckuswireless.com/documents/2507-smartzone-5-1-ga-getting-started-guide-sz100

FYI a SmartZone (SZ) 100 unit can only form a cluster with other SmartZone 100 units of the same model. For example, a SZ104 cannot be clustered with a SZ124 unit. 

Feel free to reach me out for any further concern or query.

Best Regards
Vineet

rahimi_mohammad
New Contributor
Hi everyone,
I have a SmartZone100 and want to add another for redundant, is any way to connect two ZD together? Is it supported?
If yes whats the configuration?

rahimi_mohammad
New Contributor
Please explain the method of physical connection of two smart zones 100 for redundancy

Ethernet from SZ-100 to your switch, and you may have Ethernet or fiber between if you have multiple switches.

Imagine both your SZ-100s in the Figure 4 image in the Quick Setup Guide.  https://support.ruckuswireless.com/documents/2817-smartzone-100-quick-setup-guide