smart zone 100 redundancy connection

[felipe_herrera_]

Hi, please help me in the description of connection phisycal between two sz100 in mode clustering. As it should be the connection to the switches that are in
Redundancy vrrp.

thanks

[rahimi_mohammad]

Hello. Sorry for mistake in the text.
I'm planning to have redundant for SZ100. Would you please help me?

Thanks alot

[Vineet_nejwala]

Hello Rahimi,

The process is very simple, kindly download the "Getting Started Guide" through below link and search with " Configure the Cluster Settings". 
https://support.ruckuswireless.com/documents/2507-smartzone-5-1-ga-getting-started-guide-sz100

FYI a SmartZone (SZ) 100 unit can only form a cluster with other SmartZone 100 units of the same model. For example, a SZ104 cannot be clustered with a SZ124 unit. 

Feel free to reach me out for any further concern or query.

Best Regards
Vineet

[rahimi_mohammad]

Hi everyone,
I have a SmartZone100 and want to add another for redundant, is any way to connect two ZD together? Is it supported?
If yes whats the configuration?

[rahimi_mohammad]

Please explain the method of physical connection of two smart zones 100 for redundancy

[michael_brado]

Ethernet from SZ-100 to your switch, and you may have Ethernet or fiber between if you have multiple switches.

Imagine both your SZ-100s in the Figure 4 image in the Quick Setup Guide.  https://support.ruckuswireless.com/documents/2817-smartzone-100-quick-setup-guide