cancel
Showing results for 
Search instead for 
Did you mean: 

Requirements vSZ

javier_leal_lil
New Contributor III

Hi!

I have a vSZ with v3.4.2 version and I want to upgrade until the v5.2.2. Previusly, I have to upgrade at v3.6.2. I have read the requirement of v5.2.2 and, if I am not wrong, I need 4 node, 18GB RAM per node and 100GB per node. Right now, I have 300 AP into de vSZ and 1000 AP max suported. Also, I have these APs in 3 diferent domains. It is correct? 

Thanks!

1 ACCEPTED SOLUTION

vijaykuniyal
RUCKUS Team Member

Hi @javier_leal_lil,

Based on your current APs(300) your setup will fall under (1-2 Nodes, 4 Logical processor, 16 GB RAM, 100 GB disk per node.), if you want 1000 APs to be supported in future (1-2 Nodes, 4 Logical processor, 18 GB RAM, 100 GB disk per node.)

You can follow below guides to understand the vSZ requirement based on you current setup and if any future enhancement is planned, it will give you accurate idea for your resource allocation, considering fail over scenarios.

Full Upgrade Guide for 5.2.2

https://support.ruckuswireless.com/documents/3580-smartzone-5-2-2-ga-upgrade-guide

Min requirement Link

https://docs.commscope.com/bundle/sz-522-upgradeguide-sz/page/GUID-80DECFB6-DC93-4991-9C88-16978D9FA...

 

 

Vijay Kuniyal

Staff Technical Support Engineer

CCNA RnS | CCNA Wireless | CWNA | RASZA | Meraki CMNO | RACPA

View solution in original post

2 REPLIES 2