cancel
Showing results for 
Search instead for 
Did you mean: 

Different dataplane firmware version after replacing SCG200 in a cluster

ashan_karunarat
New Contributor
We have clustered two SCG 200 and due to a failure in a dataplane we have replace the faulty unit to a new SCG200. After integrating the new device with working SCG ( before replace the new device firmware has upgrade to compatible with the existing SCG) we see the dataplane firmware is different with the existing SCG. New SCG dataplane firmware version is lower than the older SCG dataplane. Need to know why there is a difference?

Command show version output same version in both SCGs, but under cluster planes it shows different firmware versions in dataplane.
2 REPLIES 2

michael_brado
Esteemed Contributor II
I don't know how physical controller SCG200 with built-in dataplane can have different than controller version.
What version of code are you running please?  What info are you seeing with differing DP version (I may not
be aware of)? 


In latest SmartZone releases for SCG200, the SCG and DP versions were the same.  In much earlier releases
we did have different version for DP, ie.
SCG200-C


Controller Version: 3.6.2.0.250

Control Plane Software Version: 3.6.2.0.78

AP
Firmware Version: 3.6.2.0.759

 and no
mention of Dataplane...



 

If I
look back at SZ 3.6 (GA) Release Notes I see:

SCG 200

Controller Version: 3.6.0.0.510

Control Plane Software Version: 3.6.0.0.392

AP
Firmware Version: 3.6.0.0.709

 

But back
to SZ 3.1.2p2 Release Notes, I see:

SCG-200
Release Information

SCG-200 system version: 3.1.2.0.536

Control plane software version: 3.1.2.0.514

Data
plane software version: 3.1.2.0.521

AP
firmware version: 3.1.2.0.150

ashan_karunarat
New Contributor
Hi Michael,

On both SCG200 s the firmware version same as below.

   Model                           : SCG200
   SCG Version                     : 3.4.2.0.176
   Control Plane Software Version  : 3.4.2.0.93
   Data Plane Software Version     : 3.4.2.0.118
   AP Firmware Version             : 3.4.2.0.384

But when check the Dataplance firmware version from cluster plane is different. 
Image_ images_messages_5f91c44e135b77e247a144aa_27708df52929836303f1110c88c3f1d3_RackMultipart20200622476901ted-7665a731-34a0-449f-bdcb-29ff854e77a6-1738237847.JPG1592805591

Regards,

Ashan