Diferents Firmware in my vSZ

[javier_leal_lil]

Hi!

I have installed a new vSZ with 5.2.2 firmware version. I want to adopt in it several old APs with other firmware version, for example 3.6.2. How can I upload to my vSZ this firmware to change one or more AP Zones to adopt these APs? 

Thanks!

[jorge_ruizdeegu · Accepted solution]

Hi Javier,

You need to upload the SmartZone AP Patch. You can find it in the SmartZone Download tab in the Support Portal:

You can also use this direct link:

https://support.ruckuswireless.com/software/3068

Then, you need to upload the .patch file in the "Administration"/"Upgrade"/"AP Patch" section:

Let me please know any issue you may find on the process.

Thanks,

Jorge

[javier_leal_lil]

Thanks very much Jorge.

I have installed the new patch to allow old devices but I dont find the way to put a one ap zone the firmware 3.6.2 for example. It only allow me put 5.1.2 (initial firmware installation vsz) and 5.2.2.

Thanks!

[bruno_andrade]

Hi Javier, you must create a new zone and during the creation, it will allow you to choose the 3.6.2 firmware.

[javier_leal_lil]

Thanks very much Jorge. This resolved my problem! Regards